Denali 194 Marker Bulb Plug-and-Play Trigger Wire Adapter

Original price was: $57.99.Current price is: $29.00.

This adapter is designed to prevent electrical accessories from interfering with the electrical system on late model BMW Ducati and other European motorcycles with a...

SKU: EC.02350 Category: Tools Availability: In stock

This adapter is designed to prevent electrical accessories from interfering with the electrical system on late model BMW Ducati and other European motorcycles with a Can-BUS electrical system and a “City Light” 194 marker bulb in the headlight. Please Note: Only compatible with bikes that use a 194 marker bulb and have a “universal” bulb connector; will not fit bikes with a custom OEM 194 bulb connector. It includes a diode for built-in reverse polarity protection. This item is designed solely to provide a “hot” trigger wire to activate a relay to power other accessories such as driving lights accessory fuse blocks GPS or other 12-volt electrical devices when the motorcycle is turned on without upsetting the motorcycle’s sensitive CAN-BUS system. This adaptor is also removable without leaving holes in the insulation of the original wiring harness so it keeps your warranty in place even at the strictest dealers. Installation is simple: 1. Remove the socket from the headlight housing. 2. Unplug the bulb from the socket. 3. Plug the circuit board into the socket from where you just removed the bulb. 4. Place heat shrink over the socket and circuit board and apply heat. 5. Plug the bulb into the new socket. 6. Using the lead coming from the socket activate an external relay. External relay not included. We recommend the Twisted Throttle Power Hub Auxiliary Motorcycle Fuse Block (sold separately) for attaching up to 6 switched accessories to your motorcycle. The following bikes are confirmed to use Canbus electrical systems and have 194 marker bulbs. We have NOT confirmed that the 194 marker bulb connector on these bikes is a “universal” shape and is compatible with this part. Please send us photos if you’ve confirmed fit (or not fit) and we’ll update our site! BMW F650GS ’08- F800GS ’08- F800S* F800ST* HP2 Enduro HP2 Megamoto HP2 Sport K1200R K1200R Sport K1200S K1200GT -’05 R1200GS R1200GS Adventure <R1250GSR1250GS AdventureR1200R R1200RT R1200S R1200ST …and most other R and K series bikes 2005 and later. Asterisks (*) used above indicate that the bike uses some CANBUS technology but uses a standard non-CANBUS 3-wire running/brake light. Such bikes can trigger a relay or running light simply by tapping into the running light wire; no CANBUS adapter is necessary for low load applications. We’ve heard rumors that the Kawasaki ZX14 and GTR1400 Concours may have a canbus system but we have not yet confirmed this. Bikes confirmed NOT to have Canbus electrical systems: BMW F650CS F650ST and Funduro F650GS -’04 F650GS ’05-’07 G650Xcountry G650Xmoto and G650Xchallenge G450X K1100LT K1100RS K1200GT -’05 K1200LT -’08 K1200RS R1100 anything R1150GS R1150GS Adventure R1150R R1150RS R1150RT R1200C R1200CL …and most other R and K series bikes before 2005.

Add a Review

Your email address will not be published. Required fields are marked *

Related Products